修复你的物品 维修的权力 商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 8

步骤 8
The top edge of the display is secured with both glue and clips. Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port. The clips will break if you use too much force. Work carefully and be patient.

  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

显示屏的上边缘由胶水与卡扣一同固定。

在显示屏的上角划动塑料拨片，并轻轻地向下朝闪电接口方向拉动或者滑动显示屏。

若用力过猛可能会损坏卡扣，请小心操作。

再次重申，不要将塑料拨片插入过深——仅需要插入距离显示面板边缘几毫米即可——否则您可能会损坏前面板传感器阵列。

划动塑料拨片至另一边角以划开剩下的固定胶。

在开源创作共享许可协议下，你的投稿已被许可。