跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 5

步骤 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

缓缓用力向上拉吸盘,在玻璃前面板和金属外壳之间拉开一个小缝隙。

将塑料拨片插入缝隙中。

固定屏幕用的的防水粘合剂非常牢固;要打开这个间隙可能需要非常用力。如果您发现很难分离屏幕与后盖,请继续加热,并轻轻地拉动屏幕以弄松粘合剂,直到拉开一个可以插入塑料拨片的缝隙即可。

在开源创作共享许可协议下,你的投稿已被许可