跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 6

步骤 6
Remove the five screws securing the logic board connector bracket to the rear case: One 1.3 mm Phillips #000 screw
Unscrew the logic board connector cover
  • Remove the five screws securing the logic board connector bracket to the rear case:

  • One 1.3 mm Phillips #000 screw

  • One 1.5 mm Phillips #000 screw

  • Three 1.2 mm Y000 screws

  • Remove the bracket.

  • Be careful not to lose the smaller bracket clipped onto the edge. It's secured with a small clip and is easy to accidentally knock off of the larger bracket.

卸下五颗连接到后壳 固定主板插座挡板的螺丝

卸下三个 1.2 mm Y000 螺丝

一个1.5 mm Phillips螺丝

一个 1.3 mm Phillips螺丝

拿下盖板

小心不要丢掉在边缘上的小支架 它由小卡扣固定 拆除时很有可能会把它从盖板上脱落

[title] Unscrew the logic board connector cover
[* black] Remove the five screws securing the logic board connector bracket to the rear case:
[* red] Three 1.2One 1.3 mm Y000 screwsPhillips #000 screw
[* orange] One 1.5 mm Phillips #000 screw
[* yellow] One 1.3Three 1.2 mm Phillips screwY000 screws
[* red] Three 1.2One 1.3 mm Y000 screwsPhillips #000 screw
[* orange] One 1.5 mm Phillips #000 screw
[* yellow] One 1.3Three 1.2 mm Phillips screwY000 screws
[* black] Remove the bracket.
[* icon_note] Be careful not to lose the [https://d3nevzfk7ii3be.cloudfront.net/igi/BLoNCtTggDqOfLxl|smaller bracket|new_window=true] clipped onto the edge. It's secured with a [https://d3nevzfk7ii3be.cloudfront.net/igi/XcoV2gOk5ISoxJLN|small clip|new_window=true] and is easy to accidentally knock off of the larger bracket.

在开源创作共享许可协议下,你的投稿已被许可