跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 4

步骤 4
Use the tip of a spudger to pry up and disconnect the digitizer cable. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
Disconnect the digitizer
  • Use the tip of a spudger to pry up and disconnect the digitizer cable.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

使用尖头撬棍 翘起触摸排线

要重新安装这种排线接口,你需要小心对准然后从一侧按压 再从另外一面按压 直到完全卡住 不要从中间按压 如果接头没有对准 就可能会导致接点弯曲 造成损坏

如果维修后你的手机出现触控失灵的情况 ,断开电源 并尝试重新安装接头,要保证接头完全接触 并保证插座中没有灰尘等杂物

[title] Disconnect the digitizer
[* black] Use the tip of a spudger to pry up and disconnect the digitizer cable.
[* icon_reminder] To re-attach [guide|25629|press connectors|stepid=70308|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
[* icon_reminder] If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

在开源创作共享许可协议下,你的投稿已被许可