跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 5

步骤 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

缓缓用力向上拉吸盘,在前面板和后壳体之间形成一个小间隙。

将塑料拨片插入缝隙中。

将显示器固定在适当位置的防水粘合剂非常牢固;要打开这个间隙可能需要很大的力。如果您发现很难分离屏幕与后盖,请继续加热,并轻轻地拉动屏幕以弄松粘合剂,直到拉开一个可以插入塑料拨片的缝隙即可。

[title] Lift the display slightly
[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
[* black] Insert an opening pick into the gap.
[* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

在开源创作共享许可协议下,你的投稿已被许可