跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南

英语
中文

正翻译步骤 7

步骤 7
Press the new foot into place firmly with your finger, then apply pressure by pinching the foot from either side of the case with your finger and your thumb. Maintain pressure for 30 seconds to set the pressure-sensitive adhesive.
  • Press the new foot into place firmly with your finger, then apply pressure by pinching the foot from either side of the case with your finger and your thumb.

  • Maintain pressure for 30 seconds to set the pressure-sensitive adhesive.

  • Repeat the last seven steps for any remaining broken or worn feet.

用手指将新脚垫牢牢按入到位,然后用食指和拇指从机身背板的两侧捏住脚垫

按压 30 秒以使压敏胶生效

重复以上步骤,更换损坏或磨损的其它脚垫

在开源创作共享许可协议下,你的投稿已被许可