跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Use a Y000 driver to remove the tri-point screw securing the metal cover plate. Use a pair of tweezers to remove the cover plate. First open the plate all the way to unhinge the two flaps.
  • Use a Y000 driver to remove the tri-point screw securing the metal cover plate.

  • Use a pair of tweezers to remove the cover plate.

  • First open the plate all the way to unhinge the two flaps.

  • Then close it halfway to remove it completely by lifting it out.

卸下固定金属盖板的Y型#000螺丝。

用一把镊子取下盖板。

首先打开盖板。

然后将其关闭一半,将其完全取出。

[* red] RemoveUse a Y000 driver to remove the Tri-point #000tri-point screw securing the metal cover plate.
[* red] RemoveUse a Y000 driver to remove the Tri-point #000tri-point screw securing the metal cover plate.
[* black] Use a pair of tweezers to remove the cover plate.
[* black] First open the plate all the way to unhinge the two flaps.
[* black] Then close it halfway to remove it completely by lifting it out.

在开源创作共享许可协议下,你的投稿已被许可