菜单

你的设置

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 6

步骤 6
Insert an opening pick under the display and carefully separate the Force Touch gasket from the display. iFixit screen and battery repair kits include a replacement Force Touch gasket, so don't fret too much if yours is damaged. Otherwise, to preserve the Force Touch gasket, pry carefully under the edge of the display. If the the Force Touch gasket splits when lifting the display, or if you separate the gasket layers, you'll also need to replace the Force Touch gasket itself.

  • Insert an opening pick under the display and carefully separate the Force Touch gasket from the display.

  • iFixit screen and battery repair kits include a replacement Force Touch gasket, so don't fret too much if yours is damaged.

  • Otherwise, to preserve the Force Touch gasket, pry carefully under the edge of the display. If the the Force Touch gasket splits when lifting the display, or if you separate the gasket layers, you'll also need to replace the Force Touch gasket itself.

  • Slide the pick around the display to separate the adhesive between the Force Touch gasket and the display.

  • Don't insert the opening pick deeper than 1/16th of an inch (~2 mm).

在显示屏下方插入一个开口拨片，小心地将Force Touch垫圈与显示屏分开。

确保您找对了位置。 如果在抬起显示屏时把Force Touch垫片分离了，或者您将垫圈层分开，则还需要更换Force Touch垫圈本身。

在显示屏周围滑动拨片以分离Force Touch垫圈和显示屏之间的粘合剂。

不要将开口拨片插入深度超过1/16英寸（~2 mm）。

[* black] Insert an opening pick under the display and carefully separate the Force Touch gasket from the display.
[* icon_note] iFixit screen and battery repair kits include a replacement Force Touch gasket, so don't fret too much if yours is damaged.
[* icon_caution] Make sure you get right underneathOtherwise, to preserve the Force Touch gasket, pry carefully under the edge of the display. If the the Force Touch gasket splits when lifting the display, or if you separate the gasket layers, you'll also need to replace the Force Touch gasket itself.
[* icon_note] iFixit screen and battery repair kits include a replacement Force Touch gasket, so don't fret too much if yours is damaged.
[* icon_caution] Make sure you get right underneathOtherwise, to preserve the Force Touch gasket, pry carefully under the edge of the display. If the the Force Touch gasket splits when lifting the display, or if you separate the gasket layers, you'll also need to replace the Force Touch gasket itself.
[* black] Slide the pick around the display to separate the adhesive between the Force Touch gasket and the display.
[* icon_caution] Don't insert the opening pick deeper than 1/16th of an inch (~2 mm).

在开源创作共享许可协议下，你的投稿已被许可。