跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 2

步骤 2
Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
Apply heat
  • Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.

  • Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.

  • You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

准备iOpener,并加热显示屏以软化粘合剂,将其固定到位。

[*title] Apply heat
[*
black] [guide|11677|Prepare an iOpener|new_window=true],iOpener] (or grab a hair dryer or heat gun) and heat the displayface of the watch until it's slightly too hot to touch.
[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and
soften the adhesive securingholding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry
it in placeoff.
[*title] Apply heat
[*
black] [guide|11677|Prepare an iOpener|new_window=true],iOpener] (or grab a hair dryer or heat gun) and heat the displayface of the watch until it's slightly too hot to touch.
[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and
soften the adhesive securingholding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry
it in placeoff.

在开源创作共享许可协议下,你的投稿已被许可