跳转到主内容
英语
中文

Apple Watch Series 3 电池更换

指南的前提条件

只有所有的必备指南都已被翻译,此翻译才会被认为是完整的。

Apple Watch Series 2 的屏幕开启指南

Apple Watch Series 3 电池分离 —— 前提条件指南

指南信息

= 完成 = 未完成
This guide shows you howHow to replace thean old battery that no longer holds a charge in anthe Apple Watch Series 3.
    Use this guide to replace thea worn-out battery in your Apple Watch Series 3.

    This guide shows the procedure on the standard, GPS-only version of the watch, but the cellular/LTE version is similar. Any important differences are noted in the text.

    Note: If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions]].
      With the new battery installed you can turn on the watch for testing before glueing it shut. To reassemble your device, shut it down and follow these instructions in reverse order. Be sure to remove any old adhesive on the back of the display and the top of the force touch gasket before applying new adhesive as shown in [guide|116656|this adhesive replacement guide|new_window=true].
      '''Once your new battery is set in place, continue from Step 10 of the [guide|123648|Force Touch Gasket guide|stepid=239215] to re-seal your watch and complete your repair.'''

      描述一下你正在修理的device的特别配件或组件。例如:电池

      创建一个标题。

      这个简短的一两句总结将会出现在搜索结果中。

      在读者深入阅读这份指南之前做好背景信息交流。

      说明(指南)步骤

      第 1 步

      使用撬棒的平端在电池和电源按钮旁边的框架之间撬动。这样,在拉出电池时,不要挤压或折叠任何电缆。

      第 2 步

      在开源创作共享许可协议下,你的投稿已被许可