跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Remove the battery.
  • Remove the battery.

  • Be sure to remove the protective liner to expose the adhesive on your new battery before you set it in place.

  • If needed, try re-using the existing adhesive to secure the battery. Alternatively, try a small piece of double-sided tape such as Tesa 61395, or a dab of liquid adhesive such as E6000.

  • If you're using an iFixit repair kit, proceed to the guide linked in the conclusion below to install a new Force Touch sensor and re-seal your watch.

  • Alternatively, if you are just replacing the adhesive and not the sensor, see the adhesive replacement guide for applying new adhesive and then reassembling.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

+[* black] Remove the battery.
+[* icon_reminder] Be sure to remove the protective liner to expose the adhesive on your new battery before you set it in place.
+ [* black] If needed, try re-using the existing adhesive to secure the battery. Alternatively, try a small piece of double-sided tape such as [product|IF317-072|Tesa 61395|new_window=true], or a dab of liquid adhesive such as [product|IF145-413|E6000|new_window=true].
+[* icon_reminder] ***If you're using an iFixit repair kit***, proceed to the guide linked in the conclusion below to install a new Force Touch sensor and re-seal your watch.
+[* icon_reminder] Alternatively, if you are just replacing the adhesive and not the sensor, see the [guide|116656|adhesive replacement guide|new_window=true] for applying new adhesive and then reassembling.

在开源创作共享许可协议下,你的投稿已被许可