跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Use scissors to cut one of your opening picks to about the width of the battery. Try not to leave any sharp corners. Insert the modified pick between the edge of the battery and the case, on the side opposite the digital crown. Use constant, steady pressure to slowly pry the battery up, separating it from the adhesive securing it to the system board.
  • Use scissors to cut one of your opening picks to about the width of the battery. Try not to leave any sharp corners.

  • Insert the modified pick between the edge of the battery and the case, on the side opposite the digital crown.

  • Use constant, steady pressure to slowly pry the battery up, separating it from the adhesive securing it to the system board.

  • If needed, you can also safely pry along the top edge of the battery, against the Taptic Engine.

  • Mind the display cables so you don't damage them when levering the battery out.

  • Make sure you don't puncture or deform the battery, as it can catch fire and/or explode if damaged.

使用撬棒的平端在电池和电源按钮旁边的框架之间撬动。这样,在拉出电池时,不要挤压或折叠任何电缆。

缓慢但稳定地提起电池,使其与下面的粘合剂分离,将其固定到位。

确保不要刺破电池或使电池变形,因为如果电池损坏可能会着火和/或爆炸。

取出电池。

请参阅结论中的粘合剂更换指南,以便在重新组装时使用新的粘合剂。

-[* red] Get the flat end of a spudger between the battery and the frame next to the power button. This way you don't squeeze or crease any cables when levering the battery out.
-[* black] Slowly but steadily lift the battery to separate it from the adhesive underneath securing it in place.
+[* black] Use scissors to cut one of your opening picks to about the width of the battery. Try not to leave any sharp corners.
+[* black] Insert the modified pick between the edge of the battery and the case, on the side opposite the digital crown.
+[* black] Use constant, steady pressure to slowly pry the battery up, separating it from the adhesive securing it to the system board.
+ [* icon_note] If needed, you can also safely pry along the top edge of the battery, against the Taptic Engine.
+ [* icon_caution] Mind the display cables so you don't damage them when levering the battery out.
[* icon_caution] Make sure you don't puncture or deform the battery, as it can catch fire and/or explode if damaged.
-[* black] Remove the battery.
-[* icon_reminder] See the adhesive replacement guide linked in the conclusion for applying new adhesive when reassembling.

在开源创作共享许可协议下,你的投稿已被许可