跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Unscrew the two 10.0 mm Phillips #1 screws, and gently pull back the green circuit board. Remove gently. The circuit board is connected by wire to the board. Removing the cable from the console case may allow more slack.
  • Unscrew the two 10.0 mm Phillips #1 screws, and gently pull back the green circuit board.

  • Remove gently. The circuit board is connected by wire to the board. Removing the cable from the console case may allow more slack.

  • The button springs may be under compression.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可