跳转到主内容
英语
中文

正翻译步骤 12

步骤 12
Things are starting to look Air-y inside this golden chassis—we can almost see the finish line! Still lingering above the battery cavern are the metal antenna bracket and the new (modular!) Touch ID sensor, each secured by Torx screws. FYI, the Touch ID sensor can come out directly after the smaller audio board is removed—we just chose to let it linger.
  • Things are starting to look Air-y inside this golden chassis—we can almost see the finish line!

  • Still lingering above the battery cavern are the metal antenna bracket and the new (modular!) Touch ID sensor, each secured by Torx screws.

  • FYI, the Touch ID sensor can come out directly after the smaller audio board is removed—we just chose to let it linger.

  • A few more Torx screws later, the display is free! This new Retina panel is almost the same as the one found on the MacBook Pro line, differing mainly in peak brightness (a mere 300 nits vs. the Pro's 500) and P3 color gamut support.

我们几乎能看到拆解的终点了。

金属天线支架和新的(模块化!)的Touch ID传感器依旧留在电池上方的空间内,其均被T型梅花螺丝固定。

仅供参考,Touch ID传感器能在移除小块的音频子板后取出—我们只是把它留到了现在。

在卸下一些T型梅花螺丝后,显示屏便能取出了!这块新视网膜面板几乎和MacBook Pro上的一样,区别在于最高亮度(Air的300尼特与Pro的500尼特)以及P3色域的支持

在开源创作共享许可协议下,你的投稿已被许可