跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Remove the two 12 mm screws by twisting counterclockwise with the T15 Torx screwdriver. To fully remove the power cord, cut the wires using a wire cutter.
  • Remove the two 12 mm screws by twisting counterclockwise with the T15 Torx screwdriver.

  • To fully remove the power cord, cut the wires using a wire cutter.

  • For reassembly, use the soldering guide in the Introduction.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可