跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 2

步骤 2
Using a Phillips #1 screwdriver, remove the two 14 mm screws closest to the center of the hoverboard. Using a Phillips #1 screwdriver, remove the four 12 mm screws located in the middle of the panel.
  • Using a Phillips #1 screwdriver, remove the two 14 mm screws closest to the center of the hoverboard.

  • Using a Phillips #1 screwdriver, remove the four 12 mm screws located in the middle of the panel.

  • Using a Phillips #1 screwdriver, remove the two 15 mm screws located closest to the wheel.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可