跳转到主内容
英语
法语

正翻译步骤 1

步骤 1
Remove the three 10 mm Phillips #1 screws connecting the balance sensor to the hoverboard. The balance sensor tabs are made of sensitive rubber. Screw them back on slowly, and do not over-tighten. The balance sensor tabs are made of sensitive rubber. Screw them back on slowly, and do not over-tighten.
  • Remove the three 10 mm Phillips #1 screws connecting the balance sensor to the hoverboard.

  • The balance sensor tabs are made of sensitive rubber. Screw them back on slowly, and do not over-tighten.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可