跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Loosen and remove the two bolts located on the backside of the caliper with a 12mm socket. Torque the two bolts to 33 ft-lbs when putting the caliper back on the mounting bracket. Remove the caliper from the mounting bracket.
  • Loosen and remove the two bolts located on the backside of the caliper with a 12mm socket.

  • Torque the two bolts to 33 ft-lbs when putting the caliper back on the mounting bracket.

  • Remove the caliper from the mounting bracket.

  • Do not allow the caliper to hang freely. This will causes stretching or internal blocking of the brake line.

  • TIP: Using hang wire to hang the caliper on the spring mount to keep it out of the way.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可