跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
Disconnect all the indicated connectors by opening their latches. Remove the flex cable that connects the logic board to the secondary control board. Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running into the connector.
Disconnect all the labeled cables
  • Disconnect all the indicated connectors by opening their latches.

  • Remove the flex cable that connects the logic board to the secondary control board.

  • Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running into the connector.

  • Disconnect the two hidden connectors under the top connector indicated in pink.

  • Disconnect the third hidden connector.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可