跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
Disconnect all the labeled connectors by opening their latches. Remove the flex cable that connects the logic board to the secondary control board. Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running to the connector.
Disconnect all the labeled cables
  • Disconnect all the labeled connectors by opening their latches.

  • Remove the flex cable that connects the logic board to the secondary control board.

  • Pull the small green connector out of its socket. Be careful when removing it, as it is possible to tear the tiny wires running to the connector.

  • Disconnect the two hidden connectors under the top connector labeled in pink.

  • Disconnect the third hidden connector.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可