翻译步骤＃13 - Nikon 1 J5 Teardown (repair purpose)

英语

中文

正翻译步骤 13

步骤 13

Discharge flash reservoir capacitor

Dangerous DC Voltage > 200V, stored in a 330V 80uF capacitor set.
Flash xenon tube terminals, positive connected to capacitor, negative controlled by circuit, and a trigger signal.
Use 10kohm, >2W resistor, connect 2 solder joints for more than 5sec. These are flash condenser/capacitor terminals. DO NOT discharge by SHORT them. (Note 2020-10-13)
DMM's Low-Z voltage works even better, also safer.
Measure voltage between 2 solder joints to ensure voltage <10V

在开源创作共享许可协议下，你的投稿已被许可。