跳转到主内容
英语
中文

正翻译步骤 29

Step 29
Move back to the passenger side. Remove the gas tank old gasket.  I was able to slide this over the assembly without needing to remove it. Likewise, install a new gasket (shown in orange here).  Again, I could slip this over the existing assembly without much effort.
  • Move back to the passenger side.

  • Remove the gas tank old gasket. I was able to slide this over the assembly without needing to remove it.

  • Likewise, install a new gasket (shown in orange here). Again, I could slip this over the existing assembly without much effort.

  • Clean the mating surface of the gasket before installation to ensure a good seal.

  • Push the assembly back into place. The assembly has a tab to align it to the proper direction.

  • Do not make any connections yet.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可