跳转到主内容
英语
中文

正翻译步骤 15

Step 15
Go back to the fuel tank access ports. Remove the electrical connector for the fuel pump.
  • Go back to the fuel tank access ports.

  • Remove the electrical connector for the fuel pump.

  • Use a large flat blade screw driver to insert into the tab. Gently push the top of the screw driver toward the wires.

  • Pull up on the connector. If yours is difficult to remove, you can get some extra leverage from a 90° screwdriver as shown.

  • Be sure to release the latch (using the large flat blade screwdriver) before prying up with the 90° screwdriver.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可