跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 2

步骤 2
Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons). Slide the flat edge of an opening pick up the side of the Joy-Con. Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel has shallow interference-fit tabs on the side opposite the charging rail. These  loosen fairly easily, so not much pressure is needed.
  • Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).

  • Slide the flat edge of an opening pick up the side of the Joy-Con.

  • Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel has shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed.

从Joy-Con的下方插入吉他拨片(与R和ZR键相对的那一侧)。

沿着Joy-Con的边缘缓缓移动。

请注意不要将拨片插入得太深。这有可能破坏内部的零件。背板可以很轻易地松开,所以不要用太大的力气。

[* black] Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).
[* black] Slide the flat edge of an opening pick up the side of the Joy-Con.
[* icon_note] Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosenshas shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed.
[* icon_note] Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosenshas shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed.

在开源创作共享许可协议下,你的投稿已被许可