修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Use a spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair. Be extremely careful while you pry up the battery connector. If it does not come up easily, try gently pulling on the wires to disconnect it.

  • Use a spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.

  • Be extremely careful while you pry up the battery connector. If it does not come up easily, try gently pulling on the wires to disconnect it.

用一根撬棒轻轻将电池的接头从插座上分离。这可以保证在拆解过程中Joy-Con并没有带电。

请注意震动马达和红外传感器的接头离电池接头非常近，在断开电池接头的时候请务必小心。

[* black] Use a spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
[* icon_caution] Use cautionBe extremely careful while working around the IR sensor cable and vibration motor cable that run close toyou pry up the battery connector. If it does not come up easily, try gently pulling on the wires to disconnect it.
[* icon_caution] Use cautionBe extremely careful while working around the IR sensor cable and vibration motor cable that run close toyou pry up the battery connector. If it does not come up easily, try gently pulling on the wires to disconnect it.

在开源创作共享许可协议下，你的投稿已被许可。