跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 4

步骤 4
Use a JIS 000 screwdriver to remove the following screws securing the rear panel: One 2.5 mm-long screw on the top edge of the device
Remove the top and bottom screws
  • Use a JIS 000 screwdriver to remove the following screws securing the rear panel:

  • One 2.5 mm-long screw on the top edge of the device

  • Two 2.5 mm-long screws on the bottom edge of the device

  • If you don't have a JIS screwdriver, you can use a Phillips in a pinch. Be very careful, as a Phillips driver can easily cam out and strip the screwhead.

使用JIS000螺丝刀取下如下固定后面板的螺丝

一颗在顶部边缘的长度为2.5毫米的螺丝

两颗在底部边缘的长度为2.5毫米的螺丝

[title] Remove the top and bottom screws
[* black] Use a JIS 000 screwdriver to remove the following screws securing the rear panel:
[* red] One 2.5 mm-long screw on the top edge of the device
[* orange] Two 2.5 mm-long screws on the bottom edge of the device
+ [* icon_note] If you don't have a JIS screwdriver, you can use a Phillips in a pinch. Be very careful, as a Phillips driver can easily cam out and strip the screwhead.

在开源创作共享许可协议下,你的投稿已被许可