跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 8

步骤 8
During reassembly, to seat the headphone jack connector, pull the entire game card reader board slightly toward the top edge of the Switch so that the headphone jack connector lines up with its socket. Use your spudger to press the connector down until it snaps into place. Press all along the top of the connector to make sure it seats correctly, including the area under the heat pipe.
Reassembly Note
  • During reassembly, to seat the headphone jack connector, pull the entire game card reader board slightly toward the top edge of the Switch so that the headphone jack connector lines up with its socket.

  • Use your spudger to press the connector down until it snaps into place.

  • Press all along the top of the connector to make sure it seats correctly, including the area under the heat pipe.

在组装时,为了让耳机孔连接器就位,请先将整个游戏卡槽子板轻轻抬离Switch的顶部,这样就可以使耳机孔连接器与插座对齐。

用撬棒按压连接器直到听到咔哒声表示连接到位。

沿着整个插头的顶部按压,确保排线放置的位置正确,包括热管下的区域。

在开源创作共享许可协议下,你的投稿已被许可