跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
The glass front panel on the second generation Touch has a plastic frame glued both to its outer edge and also under the wide black strips at the top and bottom of the device. The frame also has a rubber strip that surrounds the edge of the glass panel.
  • The glass front panel on the second generation Touch has a plastic frame glued both to its outer edge and also under the wide black strips at the top and bottom of the device. The frame also has a rubber strip that surrounds the edge of the glass panel.

  • The picture at left (front panel already removed) shows the locations of the metal clips (shown in red) that snap on to the plastic frame. In the next few steps, try to pry the front panel up from the gaps between these clips.

  • Also, be mindful of the very thin and delicate touch screen ribbon cable (connector location shown in orange) attaching the front panel to the upper left corner of the Touch.

第二代ipod Touch的玻璃前面板上方有一个塑料框架,它的外边缘与设备顶部和底部的宽黑条带粘在一起。该框架上还有一条围绕玻璃面板边缘的橡胶条。

左侧的图片(前面板已经移除)显示了卡在塑料框架上的金属夹(以红色显示)的位置。在接下来的几个步骤中,尝试从这些卡扣之间的间隙中撬动前面板。

此外,请注意将前面板连接到ipod Touch左上角的非常薄且细的触摸屏带状电缆(以橙色标示连接器位置)。

在开源创作共享许可协议下,你的投稿已被许可