跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
西班牙语

正翻译步骤 2

步骤 2
In the following steps, you'll be cutting through the adhesive securing the back cover. The adhesive is laid out as seen in the first image, which shows the inside of the cover. Avoid slicing in this area to avoid damaging delicate ribbon cables.
  • In the following steps, you'll be cutting through the adhesive securing the back cover.

  • The adhesive is laid out as seen in the first image, which shows the inside of the cover.

  • Avoid slicing in this area to avoid damaging delicate ribbon cables.

En los siguientes pasos vas a cortar el adhesivo que sujeta la tapa trasera.

El adhesivo se coloca como se muestra en la primera imagen que muestra la parte interior de la tapa.

Evita cortar en este área para prevenir dañar los delicados cables planos.

在开源创作共享许可协议下,你的投稿已被许可