跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的11本指南

英语
中文

正翻译步骤 2

步骤 2
  • Carefully peel the two foam pieces stuck over both the heatsink and the fan away from the fan.

  • The foam only needs to be peeled back enough to clear the fan.

  • The foam is really delicate and tears easily. Use the following technique to peel the foam:

  • Insert the point of a spudger underneath the part of the foam that isn't stuck against anything,

  • Press the top of the foam with your finger to hold it in place.

  • Roll the spudger tip underneath the foam all the way to the other end of the foam to release it.

小心地将粘在散热器和风扇上的两个泡沫片从风扇上剥离。

只需将泡沫剥离到足以清洁风扇的程度。

泡沫片十分脆弱,很容易撕裂。 使用下面的方法剥离泡沫:

将撬棒的尖端插入泡沫片下方没有粘住任何东西的部分,

用手指按压泡沫片顶部以将其固定到位。

将撬棒尖端一直滚动到泡沫片下方的另一端让泡沫片分离。

在开源创作共享许可协议下,你的投稿已被许可