跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的11本指南

英语
中文

正翻译步骤 3

步骤 3
Use a spudger or your fingers to lift the heatsink up and off the motherboard to remove it. You may feel a bit of resistance. This is normal, since the heat sink is slightly bonded to the CPU with thermal paste. Clean off the old thermal paste from the heat sink and CPU using high-concentration (90% or higher) isopropyl alcohol and a microfiber cloth. Apply new thermal paste to the CPU before reassembly.
  • Use a spudger or your fingers to lift the heatsink up and off the motherboard to remove it.

  • You may feel a bit of resistance. This is normal, since the heat sink is slightly bonded to the CPU with thermal paste.

  • Clean off the old thermal paste from the heat sink and CPU using high-concentration (90% or higher) isopropyl alcohol and a microfiber cloth. Apply new thermal paste to the CPU before reassembly.

用撬棒或手指将散热器提起并从主板上卸下,以将其卸下。

你可能会感到有些抵触。这是正常现象,因为散热器会通过导热胶与CPU轻微粘合。

使用高浓度(90%或更高)的异丙醇和超细纤维布清除散热器和CPU上的旧导热膏。重新组装前,请在CPU上涂抹新的导热膏。

在开源创作共享许可协议下,你的投稿已被许可