跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Once the wire is found a steady hand and a fine tipped soldering iron should be used to reattach the wire.
Resolder the Broken Wire
  • Once the wire is found a steady hand and a fine tipped soldering iron should be used to reattach the wire.

  • Ensure that you do not head to circuit board for too long as it may cause damage (be as quick as possible!)

  • After this, the circuit board and wires should be replaced as they were before. Press the plastic cover halves together and it should click back into place.

  • And they are fixed!

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可