跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Wedge the tool in the corner and start sliding it to the left.
Opening The Unit
  • Wedge the tool in the corner and start sliding it to the left.

  • As you do this slowely twist the screw driver back and forth to release the clips.

  • Try not to let the tool slip into the control unit as this may damage the circuit board inside.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可