跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
德语

正翻译步骤 1

步骤 1
Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery. Remove the tape.
Uncover the battery connector
  • Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery.

  • Remove the tape.

Löse sorgfältig das große Stück Klebeband auf dem Akkustecker an der Kante des Logic Boards direkt beim Akku ab.

Entferne das Klebeband.

在开源创作共享许可协议下,你的投稿已被许可