跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南

英语
中文

正翻译步骤 1

步骤 1
Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
Remove the pentalobe screws
  • Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.

  • Use a P5 Pentalobe driver to remove the six screws securing the lower case:

  • Two 6.2 mm screws

  • Four 3.4 mm screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

在继续之前,请拔下并关闭MacBook电源。关闭显示屏并将其放在柔软的表面上,顶部朝下。

使用P5 五角螺丝刀卸下固定下壳的六个螺钉:

两个6.2毫米螺钉

四个3.4毫米螺钉

在整个维修过程中,记录每个螺钉并确保它准确地回到原来的位置以避免损坏你的设备。

在开源创作共享许可协议下,你的投稿已被许可