跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 13

步骤 13
Use the flat end of a spudger to lift the display cable connector up out of its socket. Only pry up on the display connector itself and not the socket on the motherboard.
  • Use the flat end of a spudger to lift the display cable connector up out of its socket.

  • Only pry up on the display connector itself and not the socket on the motherboard.

  • At this point during reassembly after the display is connected, turn the phone on and verify that the display functions correctly. If it does, turn the phone off and proceed with reassembly.

  • If it does not work, check that everything is assembled correctly and the connectors are clean. For further troubleshooting, visit our Answers Forum.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可