跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 6

Step 6
Pry up the front panel along the right edge using the method described in previous steps. Eventually work around the entire perimeter of the front panel until it is lifted slightly from the rear panel. Also, ensure that the plastic surround is separated from the clips in the rear panel.
  • Pry up the front panel along the right edge using the method described in previous steps.

  • Eventually work around the entire perimeter of the front panel until it is lifted slightly from the rear panel.

  • Also, ensure that the plastic surround is separated from the clips in the rear panel.

按照前述方法沿着右边撬动前面板。

最终沿着前面板整个周围操作直到它轻微地从背板上抬起。

同时,确保面板周围一圈的塑料已经脱离背板的扣。

在开源创作共享许可协议下,你的投稿已被许可