跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 3

步骤 3
With no exterior screws to guide the way, we attack the back cover as a possible point of entry—but after some unsuccessful heating and prying, we give up and try our luck on the display. After some iOpener and iSclack action, the touch panel seems to separate pretty cleanly. Is this a repairable, non-bonded display like back in the old days? Sadly, no—it seems we were foiled by some extra-strong adhesive under the sAMOLED panel, which held fast while the touch panel glue gave way. End result: busted display.
  • With no exterior screws to guide the way, we attack the back cover as a possible point of entry—but after some unsuccessful heating and prying, we give up and try our luck on the display.

  • After some iOpener and iSclack action, the touch panel seems to separate pretty cleanly. Is this a repairable, non-bonded display like back in the old days?

  • Sadly, no—it seems we were foiled by some extra-strong adhesive under the sAMOLED panel, which held fast while the touch panel glue gave way. End result: busted display.

  • We unplug the protected connector and remove the newly unfused display assembly to continue our journey.

外部没有螺丝来引导方向,我们将后盖作为一个可能的切入点 - 但在一些不成功的加热和撬动之后,我们放弃了,并试试我们在屏幕上的运气。

用iOpener和iSclack操作一番后,触摸面板似乎非常干净。 这是一种可修复的非粘合显示器,就像过去那样吗?

可惜的是,没有,我们似乎被AMOLED面板下的一些超强粘合剂给弄糊涂了。最终结果:破坏屏幕。

我们拔下受保护的排线并移除显示器组件以继续我们的拆解之旅。

在开源创作共享许可协议下,你的投稿已被许可