跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 7

步骤 7
Insert an opening pick into the flash side corner of the phone and carefully slice around the flash unit. Do not insert the pick more than 1/16" (1.5 mm) into the edge.
  • Insert an opening pick into the flash side corner of the phone and carefully slice around the flash unit.

  • Do not insert the pick more than 1/16" (1.5 mm) into the edge.

  • Once you are done cutting, leave the pick in the corner to prevent the adhesive from resealing.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可