跳转到主内容
英语
中文

iPhone 8 LCD 屏幕和触摸感应器更换

指南信息

= 完成 = 未完成
LCD Screen and Digitizer
LCD Screen and Digitizer
LCD Screen and Digitizer Replacement
LCD Screen and Digitizer Replacement
a.k.a. screen + LCD and digitizer assembly, in the iPhone 8.
a.k.a. screen + LCD and digitizer assembly, in the iPhone 8.
    entire display assembly. screen. [ … ] LCD screen + LCD and digitizer assembly (a.k.a. the bare “front panel”). This requires you to transfer several components from your original screen to the new one before installing it—including the front-facing camera, earpiece speaker, LCD shield plate, and home button assembly. [ … ] For all screen/display repairs, '''it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.''' The solid-state home button is paired to its original logic board by Apple, so replacing it will render it unusable. [ … ] [https://support.apple.com/ios/update|iOS 12|new_window=true]. 12]. True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.
    entire display assembly. screen. [ … ] LCD screen + LCD and digitizer assembly (a.k.a. the bare “front panel”). This requires you to transfer several components from your original screen to the new one before installing it—including the front-facing camera, earpiece speaker, LCD shield plate, and home button assembly. [ … ] For all screen/display repairs, '''it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.''' The solid-state home button is paired to its original logic board by Apple, so replacing it will render it unusable. [ … ] [https://support.apple.com/ios/update|iOS 12|new_window=true]. 12]. True Tone functionality is disabled after a screen replacement, even when using an original Apple screen.

      描述一下你正在修理的device的特别配件或组件。例如:电池

      创建一个标题。

      这个简短的一两句总结将会出现在搜索结果中。

      在读者深入阅读这份指南之前做好背景信息交流。

      说明(指南)步骤

      第 1 步

      从显示屏的一侧移除三颗 1.2 mm Y000 号螺钉,总共六颗螺丝。

      第 2 步

      加热 iOpener 并将其放置在最靠近 home 键的屏蔽边缘上,以软化将其固定到位的粘合剂。

      第 3 步

      使用开口撬片将 home 键附近的粘合剂分开,这些粘合剂将平板显示器电缆固定在LCD屏蔽板上。

      第 4 步

      从右下角插入一个开口撬片,继续将显示屏电缆与 LCD 屏蔽板分开。

      第 5 步

      轻轻将 LCD 屏蔽板从显示屏总成上提起。

      第 6 步

      就剩下显示屏和触摸感应器啦。

      在开源创作共享许可协议下,你的投稿已被许可