跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
Heat an iOpener and apply it to the upper edge of the display to soften the adhesive holding the front camera and sensor assembly in place.
Remove the front camera and sensor cable
  • Heat an iOpener and apply it to the upper edge of the display to soften the adhesive holding the front camera and sensor assembly in place.

  • Wait about two minutes before moving on to the next step to adequately soften the adhesive.

加热iOpener并将其放在显示屏的上边缘,以软化将前置摄像头和传感器组件固定到位的粘合剂。

等待大约两分钟,充分软化粘合剂,然后继续下一步。

[title] Remove the front camera and sensor cable
[* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the upper edge of the display to soften the adhesive holding the front camera and sensor assembly in place.
[* icon_note] Wait about two minutes before moving on to the next step to adequately soften the adhesive.

在开源创作共享许可协议下,你的投稿已被许可