跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 2

步骤 2
Remove the seven screws from the back of the phone using the Phillips #000 screwdriver. Separate the backing from the silver trim around the phone by using a nylon spudger to pry between the two components.
Removing the Back Housing
  • Remove the seven screws from the back of the phone using the Phillips #000 screwdriver.

  • Separate the backing from the silver trim around the phone by using a nylon spudger to pry between the two components.

  • While separating the two components, most of the buttons (including the power button) will fall out.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可