跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Use a Y000 driver to remove three 1.2 mm screws from one side of the display EMI shield. If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.
  • Use a Y000 driver to remove three 1.2 mm screws from one side of the display EMI shield.

  • If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.

使用Y000 号螺丝刀从显示屏EMI屏蔽版的一侧卸下三颗 1.2 mm 螺丝。

如果松开这些螺丝时,请在转动时将螺丝刀用力按压在螺丝上。如有必要,使用撬棒的平头从后面支撑每个显示夹扣,这样可以对螺丝施加更大的压力,而不会使夹扣弯曲。

在开源创作共享许可协议下,你的投稿已被许可