跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 5

步骤 5
Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera. Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable. Pry up to separate the edge of the flex cable from the back of the display.
  • Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.

  • Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable.

  • Pry up to separate the edge of the flex cable from the back of the display.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可