跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 3

步骤 3
Gently slide an opening pick between the antenna flex cable and the top of the speaker. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely. This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.
  • Gently slide an opening pick between the antenna flex cable and the top of the speaker.

  • This portion of the flex cable is lightly adhered in place. If necessary, apply a little heat from an iOpener or hair dryer to soften the adhesive. This will make it easier to separate the flex cable safely.

用三角撬片将天线柔性电缆和扬声器顶部之间的缝隙轻轻地分离出来。

柔性电缆的这部分会轻轻地粘附在适当位置。 如有必要,使用 iOpener 或吹风机中加一点热量来软化粘胶。 这样可以更轻松安全地分离柔性电缆。

在开源创作共享许可协议下,你的投稿已被许可