跳转到主内容
英语
中文

正翻译步骤 19

步骤 19
A rubber gasket on the bottom of the Lightning connector protects your iPhone from liquid and dust intrusion. If you are installing a new Lightning connector assembly, you may need to carefully remove and transfer the gasket to the new part. The small adhesive patch on the bottom of each microphone also protects your iPhone from liquid and dust intrusion. For best results, replace the two adhesive patches before installing your Lightning connector assembly. Check to see if your new part comes with an antenna converter cable. If it doesn't, use the point of your spudger to pry up and transfer the cable from your old Lightning assembly to the new one.
  • A rubber gasket on the bottom of the Lightning connector protects your iPhone from liquid and dust intrusion. If you are installing a new Lightning connector assembly, you may need to carefully remove and transfer the gasket to the new part.

  • The small adhesive patch on the bottom of each microphone also protects your iPhone from liquid and dust intrusion. For best results, replace the two adhesive patches before installing your Lightning connector assembly.

  • Check to see if your new part comes with an antenna converter cable. If it doesn't, use the point of your spudger to pry up and transfer the cable from your old Lightning assembly to the new one.

Lightning接口底部的橡胶垫圈可保护你的iPhone 免受液体和灰尘侵入。如果要安装新的 Lightning 接口组件,则可能需要小心地将垫圈移除并转移到新部件。

每个麦克风底部的小胶粘贴片也可以保护你的 iPhone 免受液体和灰尘侵入。为获得最佳效果,请在安装 Lightning 接口组件之前更换两个粘性贴片。

检查新部件是否配有天线转换器电缆。如果没有,请使用撬棒的尖端撬起并将电缆从旧的 Lightning 组件转移到新的 Lightning 组件。

在开源创作共享许可协议下,你的投稿已被许可