Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的12本指南

英语
中文

正翻译步骤 1

Step 1
Remove four Phillips screws securing the lower display cable bracket to the logic board, of the following lengths: Two 1.3 mm screws
  • Remove four Phillips screws securing the lower display cable bracket to the logic board, of the following lengths:

  • Two 1.3 mm screws

  • Two 2.8 mm screws

  • Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

  • Remove the bracket.

卸下将显示屏电路支架固定在电路板上的四个十字螺丝:

两个1.3毫米的螺丝

两个2.8毫米的螺丝

卸下支架。

[* black] Remove the fourfour Phillips screws securing the lower display cable bracket to the logic boardboard, of the following lengths:
[* black] Remove the fourfour Phillips screws securing the lower display cable bracket to the logic boardboard, of the following lengths:
[* red] Two 1.3 mm screws
[* orange] Two 2.8 mm screws
[* icon_reminder] Throughout this guide, [product|IF145-167-4|keep careful track of your screws] so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.
[* black] Remove the bracket.

在开源创作共享许可协议下,你的投稿已被许可