跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Remove ten Phillips #0 screws that secure the plastic bottom cover to the chassis.
Remove Bottom Cover
  • Remove ten Phillips #0 screws that secure the plastic bottom cover to the chassis.

  • Six 9.6 mm screws

  • Four 4.6 mm screws

  • Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可