跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro. Repeat the procedure from the prior steps to separate the two battery cells on this side: Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.
  • It's time to switch sides. Remove your book or foam block and place it under the opposite side of your MacBook Pro.

  • Repeat the procedure from the prior steps to separate the two battery cells on this side:

  • Apply your adhesive remover to the elevated edge of the outer battery cell, and wait 2-3 minutes for it to penetrate.

  • Work one corner of a plastic card underneath the battery cell, and slide the card fully underneath the battery cell to separate it.

  • Do the same for the adjacent cell.

  • Leave your plastic card in place or flip the battery cells over to prevent them from re-adhering during the following steps.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可