跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的21本指南

英语
中文

正翻译步骤 4

步骤 4
Rotate the mini so that the SuperDrive slot loading mechanism is facing you. Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board.
  • Rotate the mini so that the SuperDrive slot loading mechanism is facing you.

  • Use a pair of tweezers to lift the hard drive thermal sensor cable connector up off its socket on the logic board.

  • Use tweezers to grab the connector (as seen in the picture), not the wires.

  • The connector is located under the optical drive opening, next to the PRAM battery.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可